|
ハヤカワ トオル
Hayakawa Toru
早川 徹 所属 鶴見大学・鶴見大学短期大学部 学長・副学長 学長・副学長 副学長 職種 副学長 |
|
| 論文種別 | 【査読あり】 研究論文（学術雑誌） |
| 言語種別 | 英語 |
| 査読の有無 | 査読あり |
| 表題 | Non-linear finite element analysis of the failure progression of fiber-reinforced ceramics produced by tape casting technique. |
| 掲載誌名 | 正式名：Dental materials journal 略 称：Dent Mater J ISSNコード：02874547/02874547 |
| 掲載区分 | 国内 |
| 巻・号・頁 | 25(2),pp.226-33 |
| 著者・共著者 | Tanimoto Yasuhiro, Hayakawa Tohru, Nemoto Kimiya, Nishiwaki Tsuyoshi |
| 発行年月 | 2006/06 |
| 概要 | The purpose of this study was to investigate the failure progression process of fiber-reinforced ceramic by finite element (FE) analysis. The three-dimensional FE model for three-point bending simulation was 40 mm long, 4 mm wide, 3 mm thick, and with a span length of 30 mm. Nodal force with load increment of 20 N was applied at the center of the upper surface of the beam. To evaluate matrix fracture and fiber fracture, von Mises criterion and Tsai-Hill criterion were used respectively. Consequently, the stress-deflection curve obtained from FE simulation agreed with that obtained from the experimental testing. Differences in flexural strength and modulus between the analytical and experimental results were 1.3 and -2.9% respectively--demonstrating a close agreement between both results. In conclusion, the FE model applied in the present study was shown to be valid for predicting the failure progression of fiber-reinforced ceramics. |
| DOI | 10.4012/dmj.25.226 |
| PMID | 16916222 |